Flux Evo In v3 обеспечивает уникальное точное произвольное и линейное фазовое вращение сигнала для достижения тех же явлений, что и при физическом перемещении микрофона, и мягкое насыщение для достижения округлости и теплоты, восстановления и поддержания жизнеспособности звука без каких-либо слышимых искажений.
Phase & Polarity
Stay In Phase
Having full control over the microphone Phase is universal, and one of the most crucial parameters to take into account both for studio and live sound.
In addition to the classic electrical polarity inverter ( ∅ ) EVO IN provide a unique precise Arbitrary and Linear Phase Rotation of the signal, to accomplish the very same phenomena as when physically moving the microphone, without adding any latency.
This allows for correction of the Phase when recording a sound source using multiple microphones, like a drumkit or a guitar amplifier, eliminating timing problems that could be smearing the clarity of the sound or the mix.
Phase Group
Phase Align
“The art of using multiple microphones on one and the same sound source”
With EVO IN it’s really easy to Phase Align a multi-microphone or live recording where multiple microphones were used at the same time.
Simply insert EVO IN and enable Phase on all of the recorded tracks, then assign the same Group Number on all of the EVO IN instances, which makes it possible to enable and disable Phase for all of the included tracks by simply switching Phase on/off in only one of the tracks in the Group.
Now use the Phase slider on each track, listen and verify by switching Phase on and off for the group, and tweak until you have full control over the Phase and everything sounds tight and aligned.
HAPPY NEW YEAR!
* No iLok Driver is required to run.
* Our release loads faster and uses less memory than original.
Stay In Phase
Having full control over the microphone Phase is universal, and one of the most crucial parameters to take into account both for studio and live sound.
In addition to the classic electrical polarity inverter ( ∅ ) EVO IN provide a unique precise Arbitrary and Linear Phase Rotation of the signal, to accomplish the very same phenomena as when physically moving the microphone, without adding any latency.
This allows for correction of the Phase when recording a sound source using multiple microphones, like a drumkit or a guitar amplifier, eliminating timing problems that could be smearing the clarity of the sound or the mix.
Phase Group
Phase Align
“The art of using multiple microphones on one and the same sound source”
With EVO IN it’s really easy to Phase Align a multi-microphone or live recording where multiple microphones were used at the same time.
Simply insert EVO IN and enable Phase on all of the recorded tracks, then assign the same Group Number on all of the EVO IN instances, which makes it possible to enable and disable Phase for all of the included tracks by simply switching Phase on/off in only one of the tracks in the Group.
Now use the Phase slider on each track, listen and verify by switching Phase on and off for the group, and tweak until you have full control over the Phase and everything sounds tight and aligned.
HAPPY NEW YEAR!
* No iLok Driver is required to run.
* Our release loads faster and uses less memory than original.
| Сайт разработчика: | Flux |
| Размер: | 8.05 MB |
Evo In v3.7.0.47900 (Team R2R) |
