TRAKTOR PRO 2 от Native Instruments - всемирноизвестное, солидное программное обеспечение ди-джея с 4 деками, которое позволяет Вам микшировать прямо в боксе. Теперь с TRAKTOR 2 Технологией Внутри для расширенной простоты в использовании, работы и творческого потенциала, эта версия имеет новый интерфейс с TruWave, покрашенным формами волны для визуально богатого опыта Вашей музыки. Более простой чем когда-либо, чтобы использовать, TRAKTOR PRO 2 также видит прибытие новых Сэмплерных Дек и Луп Рекордера для полного творческого потенциала микса.
Новое Творческое Оружие Интеллектуальные особенности TRAKTOR теперь учитывают еще более легкое пересмешивание следов на лету. Переключите любую деку из Сэмплерных Дек и загрузите до четырех лупов или сэмплов с одним выстрелом каждый – 16 всего. Новый Луп Рекордер может сделать запись петель от каналов миксера, владелец или звуковые входы интерфейса, в то время как четыре очень требуемых новых эффекта, включая дэлей ленты и боунсер, закругляют арсенал к больше чем 30 эффектам работы.
Войдите В Микс Crate Flick покрывает просмотр искусства и полный iTunes®, и iPod® интеграция делает обнаружение правильного трека легким. Приветствуемое синхронизирующее понятие TRAKTOR гарантирует, что Ваши мелодии beatmatch отлично, таким образом Вы можете сосредоточиться на более захватывающих аспектах работы DJing. TRAKTOR, ПРО 2’s встроенный миксер, объединяет многократный EQ и типы фильтра, давая Вам полный контроль над спектром частоты.
Полная Гибкость Используйте любую комбинацию диспетчеров MIDI, таких как TRAKTOR KONTROL X1, или Ваша клавиатура и мышь, чтобы управлять программным обеспечением. Новое Авто Обнаружение делает соединение и разъединение Вашего звукового интерфейса NI легкими – даже, в то время как есть следы, играющие в TRAKTOR. Установка Wizard с опускаться меню, только выберите свой интерфейс, и он назначает входы и выходы для Вас. TRAKTOR ПРО 2 очень настраиваем с многократным, savable расположения и гибкий выбор горячей клавиши, чтобы удовлетворить Вашим потребностям.
TRAKTOR PRO 2 Особенности - Профессиональное программное обеспечение ди-джея с 4 деками и интуитивным расположением - TruWave С высокой разрешающей способностью цветной формы волны и удобный в работе интерфейс с высоким контрастом для окружающей среды клуба - Автоматическое обнаружение удара и разбитый-gridding файлов музыки плюс интуитивное синхронизирование для прекрасных миксов - Совершенно новые Сэмплерные Деки и инновационный Луп Рекордер, чтобы отредактировать и повторно смешать живые следы, плюс включенное содержание петли облегчают входить в соединение - Более чем 30 эффектов работы качества студии, включая 4 новых дополнения, все способные к синхронизированию, чтобы отследить темп - Продвинутое перекручивание и подающие реплики функции плюс 8 присваиваемых горячих реплик за треком - Полнофункциональный миксер программного обеспечения с 4 каналами с многократным EQ и вариантами фильтра - Сильное управление следом с Crate Flick покрывает просмотр искусства и полную iTunes® интеграцию - Включите и работайте со всеми диспетчерами TRAKTOR и звуковыми интерфейсами, судами с картографиями для всех соответствующих диспетчеров ди-джея - Сделайте запись своего микса, используя интегрированный звуковой регистратор - TRAKTOR PRO 2 Спецификации
New: Support for the new TRAKTOR KONTROL S8 system controller. Freeze/Slicer mode (native functionality for S8, mappable to any controller via the Controller Manager)
Bugfixes & Improvements: This version is now compatible with both MK1 and MK2 timecode records for all TRAKTOR SCRATCH PRO owners. SYNC automatically enabled for Remix Decks when launching TRAKTOR. The full waveform to the left of the playhead in a Track Deck will now be rendered – eliminates blurry waveform when using HotCues or BeatJumps. Beat Ticks enabled in any Decks are automatically turned off when quitting TRAKTOR – prevents accidentally-enabled Beat Ticks on Channel Outputs in External Mixer mode. When browsing through the iTunes Node, you can now edit tracks which have been imported into the Track Collection. When browsing through the iTunes Node, the full context (right-click) menu is now available for tracks which have been imported into the Track Collection. When browsing through the iTunes Node, Cover Art is now shown for tracks which have been imported into the Track Collection. When browsing through the iTunes Node, analyzed Key is now shown for tracks which have been imported into the Track Collection. iTunes Playlists now show cumulative time and disk usage in the Status Bar. TRAKTOR now automatically chooses the newest iTunes Library version if multiple versions (old and new) are found in the iTunes Folder. Mix Recorder level is no longer dependent on the Main Out volume. Undesirable filter sweep when enabling the Z Filter on a channel is now fixed. Canceling the “Delete from Collection” dialog still deleted the tracks from the Collection – fixed. TRAKTOR crashes when moving effects around in the Pre-Selected Effects list – fixed. Fixed an issue with the ID3 “Year” tag when non-standard date formats where written by other programs. When creating a new Playlist, the cursor is now automatically placed into the Playlist Name box.
TRAKTOR PRO 2.8.0 contains some substantial changes to the core of the software, along with numerous other feature enhancements, improvement, and bug fixes. The list below provides a comprehensive overview of all changes since the last public release (TRAKTOR PRO 2.7.3) including the improvements in the two Public Beta releases (TRAKTOR PRO 2.7.4 and 2.7.5):
2.1. 64-Bit Application Architecture
TRAKTOR PRO now has 64-bit architecture. By making TRAKTOR PRO a 64-bit application, it allows TRAKTOR PRO to access all the available RAM on computers with 64-bit operating systems; previously, TRAKTOR PRO could only access a maximum of 2GB of RAM regardless of how much RAM was actually installed and available on the computer. By giving TRAKTOR PRO access to more RAM, it will increase performance of the software by allowing management of more items (larger Track Collections, more Remix Deck samples, better playback caching, etc.).
Are you still using a 32-bit version of Windows? With this release, the 32- bit version of TRAKTOR PRO can now also access an additional 1GB of RAM (if the computer has it available) providing additional performance and stability. ATTENTION 64-BIT WINDOWS USERS: If you are using an audio interface which only has 32-bit drivers, be sure you are also using the 32- bit version of TRAKTOR PRO in order to access the low-latency ASIO drivers for the audio interface, otherwise your audio interface won’t be selectable in the TRAKTOR PRO Preferences. If you have a 64-bit operating system, the Installer will have installed the 64-bit version of the application by default and you will need to take a few extra steps to run the 32-bit version as follows:
1. Go to "C:\Program Files\Native Instruments\Traktor 2”. In this folder you will find the current 64-bit version of TRAKTOR PRO called “Traktor.exe”. Please rename this to “Traktor 64.exe” so that you have a backup of this version. 2. Please then open the “x86” subfolder. You will find another “Traktor.exe” inside. This is the 32-bit version of TRAKTOR PRO. Please move or copy this application up one sub-folder to the "C:\Program Files\Native Instruments\Traktor 2” folder. 3. Now launch this newly copied “Traktor.exe”—this will now be the 32-bit version of TRAKTOR PRO.
2.2. Multi-Processor Improvement
A significant update has just been made to TRAKTOR PRO where multi- processor support is concerned: TRAKTOR PRO’s old audio threading model has been completely updated and optimised. For users of multi- processor computers who were experiencing degraded audio performance since the release of TRAKTOR PRO 2.7.0, the new threading model should fix these issues automatically.
2.3. Automatic Deck Flavor Switching
TRAKTOR PRO now features full Automatic Deck Flavor Switching for all users; previously, this was only working when loading items via the KONTROL S8 Browser. Now, loading or dragging a Track or Remix Set onto a Deck will cause the Deck to automatically switch to the appropriate flavor to play the content.
2.4. Parallel Audio Analysis
Also new in this version is a special analysis mode called “Parallel Processing”. This option can be found at the bottom of the Analysis window which appears when you right-click on tracks and choose “Analyze (Async)” from the context menu. If you enable the Parallel Processing checkbox before clicking “OK", TRAKTOR PRO will then use multiple threads to process many tracks simultaneously. Our tests show that processing a large collection of files can now be done three times faster with this option enabled. Be aware, however, that TRAKTOR PRO will use lots of your computer’s resources to do this and it may affect playback of tracks. We therefore only recommend using this feature in an offline situation rather than during a live performance.
2.5. Support for the New TRAKTOR KONTROL D2
TRAKTOR PRO 2.8.0 supports the new KONTROL D2 hardware controller. The D2 will be officially released on May 4th, 2015.
2.6. Spin, Scratch & Hold a Playing Deck with KONTROL S8 or D2 Touchstrip
New is a preference for the KONTROL S8 and KONTROL D2 which changes the SHIFT-behavior of the Touchstrip while a Deck is playing. Previously, holding SHIFT and touching the Touchstrip would perform an Absolute Seek (the Deck’s position would jump to the location corresponding to the touch on the Touchstrip). With this new preference enabled, this behavior is changed so holding SHIFT will allow you to perform spins, scratches, and holds with the Touchstrip while the Deck is playing.
NOTE: Backspins are enhanced by the fact that TRAKTOR PRO will stop the spin as soon as you release the SHIFT button. You can therefore perform a backspin effect for 2 beats by turning on FLUX mode, holding SHIFT, and swiping backwards on the Touchstrip. Two beats later, release the SHIFT button and the spin will stop and normal playback will resume right on the beat you desire.
2.7. KONTROL S8 and D2 Beat Grid Edit Mode Zoom
When enabling Beat Grid Edit Mode on the KONTROL S8 or KONTROL D2, the left-most Performance Button will now be active. Pressing this button will zoom in on Beat 1 allowing you to set the position of the Beat Grid with greater precision. Press the button again to exit the zoom. 2.8. KONTROL S8 and D2 Position-Aware Beat Grid Tempo Adjustment
When in Beat Grid Edit Mode on the KONTROL S8 or KONTROL D2, the two center Performance Knobs are used for adjusting the Tempo of the Beat Grid—the left knob is a coarse adjustment while the right knob is a fine adjustment. The new improvement is that these knobs are scaled based on the viewing position of Beat Grid Edit Mode so that adjustments made far away from the Grid Marker don’t result in abrupt changes to the waveform position. For example, if you are near the Grid Marker at the start of a song and change the Tempo of the Beat Grid, you will see the waveform move under the Beat Grid by a particular amount. If you then scan later into the track, adjusting the Tempo will create a similar amount of motion on the waveform (rather than a large amount of motion) thus allowing for precise setting of the Beat Grid Tempo over the length of the song.
2.9. KONTROL S8 and D2 MIDI Controls
We've added a new feature to KONTROL S8 (which is also available on KONTROL D2) that allows you to use the Performance Knobs, Performance Buttons, and the Performance Faders below the Displays as MIDI output controls. You can therefore use these controls to send MIDI messages to other software or external gear. This feature is not enabled by default and requires some configuration as follows:
1. In the KONTROL S8 or D2 Preferences Pane, check the "Enable MIDI controls" preference at the bottom. 2. Click on the Controller Manager tab in the Preferences. 3. Create a new Generic MIDI Device by clicking the "Add..." button and choosing "Generic MIDI" from the list. 4. In the upper-right corner, select the MIDI port to use as the output for this Generic MIDI device. This can be the MIDI port on the S8, or it can be any other MIDI port available on your computer. 5. The next thing that needs to be done is to assign the MIDI message and MIDI channel to the various MIDI controls. Click the "Add out..." button and navigate to "Global > MIDI Controls >". Here you will find a list of the 8 Knobs, buttons, and faders on the S8 which can be mapped; if using KONTROL D2, the first 4 knobs, faders, and buttons correspond to the left controller (assigned to Decks A and C) while the last 4 knobs, faders, and buttons correspond to the right controller (assigned to Decks B and D). Click one to add it to the mapping. 6. Click the Device Mapping drop-down menu and it will show a list of 16 MIDI Channels. Hover you mouse over your desired MIDI output channel, and a sub-menu will open with message types "CC", "Note", and "Pitch Bend". You can select Pitch Bend to map the MIDI Pitch Bend message to this control, or you can hover your mouse over one of the other two menus to open up a list of specific CC and Note numbers/names–you can then click one of these to map the control to the specified Note or CC. 7. Repeat the above two steps for each of the MIDI controls you want to map. When finished, you can close the Preferences. 8. On the S8 or D2, use the Performance Mode Buttons (the arrows next to the Displays) to switch the Performance Controls into MIDI Mode (this MIDI mode page will not appear if the above preference is not turned on). 9. When the Performance Controls are in view on the S8 or D2, the Knobs and Buttons will output the MIDI messages that you assigned in the Controller Manager. The Faders will also output MIDI messages if they are not controlling a Remix Deck (in other words, neither of the Decks controlled by that side of the S8 or D2 can be Remix Decks, otherwise the faders will control the Remix Deck Slot Volumes instead of outputting MIDI).
2.10. Pioneer CDJ-900NXS and XDJ-1000 Integration
Full native support for these two Pioneer players, including all available new functions provided on the XDJ’s touch screen interface, is now integrated into TRAKTOR PRO.
2.11. Rane MP2015 Scratch Certification
The Rane MP2015 rotary mixer is now Scratch Certified and can be used as an audio interface for TRAKTOR PRO in conjunction with Timecode vinyl and/or CDs.
2.12. Additional Bugfixes
• Beta #2 (2.7.5) had a problem with FX routing modes—this issue has now been fixed. • Beta #2 also had a problem with playback of long M4A (AAC) files in the 32-bit version of the application. This has been fixed. • Beta #2 sometimes exhibited crackling when loading new tracks into Decks. This version resolves this issue. • Beta #2 could have high CPU spikes when used on some low-performance systems. We have made a change which prevents this. • We fixed a problem where TRAKTOR PRO would unnecessarily update the tags of tracks which are in the Preparation List at startup. • An issue was reported where TRAKTOR PRO could hang when accessing the Explorer node of the Browser Tree. This issue has been fixed. • At the same time, we also fixed an issue that could cause TRAKTOR PRO to crash when opening an Archive folder containing over 2500 .nml files. • We fixed an issue where TRAKTOR PRO would unnecessarily update all file tags when clicking on a Playlist .nml in the Explorer node of the Browser Tree. • We also fixed an issue where TRAKTOR PRO would unnecessarily update file tags when deleting items from a Playlist. • We fixed the CPU Load spike that can sometimes occur when engaging Keylock or Filter for the first time. • There was a problem where you sometimes couldn't re-order tracks in a Playlist without first clicking the "#" column twice and this has been fixed. • The Battery Indicator in TRAKTOR PRO's header was broken on some 64-bit systems and wouldn't show the battery level. This is now fixed. • An improvement has been made to MP4 (AAC) audio handling on Windows which should remove crackling during playback of these file types. • When adjusting the Master Clock Tempo via the S8 or D2, we have removed the "Hold BACK to Reset" text since this function wasn't valid for the Master Clock. • This version contains a fix for some crashes on startup which were part of the first Beta (2.7.4) • There were also reports of crashes or hangs on shutdown on some Windows systems and we have made a fix for it. • A bug was reported in 2.7.3 where a Deck would stop when loading a track into the playing Deck regardless of preference settings. This issue has now been fixed—loading a track into a playing track will leave the Deck playing so you immediately hear the newly-loaded track. • We also fixed an issue where jumping out of an Active Loop via a HotCue would disable the Loop—the Loop will now remain active when doing this just like in TRAKTOR PRO 2.6.8. • Fixed a problem where memory corruption could occur when browsing and sorting the Explorer node under very specific conditions with the S8 or D2. • Lastly, we fixed two issues which occurred when making changes to tracks (such as changing the track Rating) in the Explorer node while that same track was already playing in a Deck; doing so could result in the analyzed tempo being lost (causing the track to fall out of sync) or removal of the “played” checkmarks from the track. These issues should no longer occur. 2.13. Controller Editor
Controller Editor has been upgraded to version 1.8.0.262 to support KONTROL D2 in addition to other improvements and bugfixes. 3. Known Issues in TRAKTOR PRO 2.8.0
3.1. No ALAC Support on Windows
This issue still exists since Microsoft doesn’t offer any native ALAC support and since Apple’s QuickTime library has been deprecated. While this beta version does not solve the problem for Windows users, we are still investigating ways of adding this support to TRAKTOR itself since we can no longer rely on the original libraries we used for providing this functionality.
3.2. Fullscreen Issues on Windows
Some Windows users with high-resolution monitors are experiencing trouble when setting TRAKTOR to Full Screen Mode. This problem appears to only occur when the “Change the size of all items” Display Preference is set to a value larger than 125%. Therefore, if you are experiencing the problem, setting the preference to 125% or smaller should temporarily fix the issue while we continue to investigate a permanent fix.
3.3. Crackling During Playback of WMA Files on Windows
We have now diagnosed the issue that is causing the WMA playback problem on Windows, but we still need to implement a workaround for the problem which will take more time. Therefore, WMA playback issues still exist in this release version.
3.4. High CPU Load when Loading Tracks on OS X 10.8
OS X 10.8 Mountain Lion is no longer supported in TRAKTOR PRO 2.8.0. Users of OS X 10.8 may find high CPU load when loading Tracks into the Decks. If you experience this, please upgrade your OS to at least OS X 10.9 Mavericks.
Issue with only the TRAKTOR font being available in OS X is now fixed Problems with the yellow Preparation List Icon are resolved No longer crashes on startup with LE and ME versions
What's new in TRAKTOR 2.9.0? New Stem Deck with support for new Stem Files Native Stem Deck support for KONTROL S8, D2, and F1 Sub-mix controls in Controller Manager for Stem/Remix Deck Mix Various performance optimizations
TRAKTOR 2.10.0 introduces two new features and a set of bug-fixes as follows:
1. Support for the new TRAKTOR KONTROL S5 TRAKTOR 2.10.0 is the first version to include support for the new TRAKTOR KONTROL S5 controller. Please see the KONTROL S5 documentation for a description of the features and workflows. In order to support the KONTROL S5, TRAKTOR 2.10.0 also comes with the required Controller Editor update.
2. Aux Input now supports 2 Stereo Inputs The KONTROL S5 has both a Microphone and Aux Line Input which both feed through the “AUX” knob in TRAKTOR. In order to support both inputs simultaneously, the Aux Input section of the “Input Routing” preference page now supports two simultaneous inputs which are summed together and fed to the “AUX” knob. Though this addition was required for KONTROL S5 support, the feature is available for all users.
3. Fixed an issue with legacy Scratch Certified devices In TRAKTOR 2.9.0, Scratch support was broken for some of the legacy Scratch Certified devices, such as the Korg Zero4. This issue has now been fixed.
4. Fixed Remix Deck Tempo Control from KONTROL S8 & D2 In TRAKTOR 2.8.1, a bug was introduced that sometimes made the BPM adjustment for Remix Decks via KONTROL S8 and D2 unavailable. This issue is now fixed.
5. Fixed TRAKTOR Freezes/Hangs with certain WAV files A problem related to ID3 tagging of WAV files which could cause TRAKTOR to freeze/hang has been fixed.
- New: Color coding column in playlists: Right-click on the Playlist header allows to enable a new column called “Color”. The new column shows to the far right of your existing columns and can be dragged to the left. Right-click into the fields of this column, to assign the track to one of six colors. - Fixed: Remove legacy drivers from installer: Drivers of discontinued hardware products have been removed from the installer. - Fixed: Browser tree row height: The Browser Tree row height is no longer affected by changes of the Playlist row height. - Fixed: Save Remix Set: “Save Remix Set” no longer ignores captured samples. - Fixed: “Collection Invalid” message: The “Collection Invalid” message on startup does not occur anymore. - Removed: Key Lock “ECO” Quality: Traktor now always defaults to HiQ Key Lock Quality.
Native Instruments - Traktor DJ v1.4.0 iPhone iPad Native Instruments - Traktor DJ v1.4.0 iPhone iPad - № 1 в мире профессиональное DJ программное обеспечение на iPhone. Прикоснитесь к вашим трекам и...
