Ableton - Live 9 Suite v9.7 - секвенсор / виртуальная студия - полноценное студийное программное обеспечение. Suite 9 дает Вам все особенности в Live 9 плюс звук с радикально новой Библиотекой, заполненной красивыми новыми звуками и богатством полезных ресурсов. Suite 9.7 содержит 11 инструментов Ableton и эффекты включая синтезаторы, сэмплер, электрические и акустические барабаны, молотки, многочисленные выбранные инструменты, новый, переделанный Operator и эффекты моделирования ампера. Два абсолютно новых инструмента, Collision и латинские перкуссионные, закругляют набор. Ableton Suite 9 является полным пакетом: инструменты и звуки.
Главные особенности: - Мультитрековая запись до 32-bit/192 кГц - Неразрушающее редактирование с неограниченным уничтожает - Сильный MIDI, упорядочивающий из инструментов программного и аппаратного обеспечения - Продвинутое деформирование и растягивание во времени в реальном времени - Библиотека с более чем 1600 выразительными звуками, каждый с универсальными вариантами контроля - Всесторонний выбор встроенного аудио и эффектов MIDI - Широкий диапазон инструментов программного обеспечения - Стойки инструмента для простого управления сложными установками инструмента - Стойки барабана для интуитивного и отзывчивого создания удара - Стойки эффекта для освоения профессионального класса, смешиваясь и творческой звуковой обработки - Новый двигатель углубления; примените и извлеките углубления в режиме реального времени - Строительные комплекты, содержащие лупы и фразы во многих стилях - Звуковые Облегченные Объекты, от SonArte: набор инструментов реального мира возражает записям - 440 MB абстрактных, экспериментальных лупов от известных музыкальных пионеров программного обеспечения - Более чем 400 лупов и сэмплов от Zero-G - 1000-ые единственного устройства задают: простые компоненты для того, чтобы сделать новые звуки и исследовать синтез - Шаблоны песни с предварительно сконфигурированными следами и направлением - Поддержки AIFF, WAV, MP3, Ogg Vorbis и файлы FLAC - VST и поддержка AU; автоматическая компенсация задержки программного расширения - Файл REX поддерживает плюс встроенное аудио к разрезанию MIDI - Видео импорт и экспорт для того, чтобы выиграть, видео деформирование - Простой MIDI, сопоставляющий плюс мгновенное сопоставление для отобранных аппаратных средств - Полная поддержка ReWire; пробеги как Раб или Владелец - Мультиядро и поддержка мультипроцессора - Поддержка Моста, сотрудничества Ableton с Serato.
Ableton Live Suite v9.1.4 это обновленное программное обеспечение для музыкантов и ди-джеев, позволяющая создавать музыку, выступать в живую, делать монтаж, имеет новую библиотеку с красивыми звуками и массу других полезных ресурсов.
9.1.4 Release Notes
Bugfixes:
* Live would hang during launch when running as a ReWire Slave on Windows.
* Auxiliary audio outputs of certain VST plug-ins would not be delay-compensated anymore.
* Observing or controlling the APC40 button matrix with a Max for Live device would not work after disabling the control surface.
* Live could crash when receiving an invalid MIDI note quantization value from a Max for Live device.
* Fixed an issue which caused the Filter Type and its automation (if existing) to be set to an incorrect type after converting Simpler to Sampler or vice-versa.
Improvements and feature changes:
Minor improvement to ensure compatibility with Mac OS X Gatekeeper for the forthcoming OS X updates 10.9.5 and 10.10.
Improved the threshold for inverting text colour of clip names, chains, macros, etc., depending on the background color, for better readability.
Bugfixes:
The [live.thisdevice] Max for Live object would no longer send a bang message out its first outlet when adding/removing control surface scripts in the Live preferences.
Under certain conditions, the MIDI level indicator would not show any activity inside the routing chooser of a MIDI track.
The Send button on the APC40 MKII would not work when pressed for the first time.
The Launchpad's Mixer mode would stop working after using the Launchpad's Session Zoom feature in Live sets containing more that 8 tracks.
Changes for Push:
When using a low audio buffer size or high sample rate, Push's buttons would not be backlit after launching Live (Windows only).
When entering Scales mode on Push, the Selection and State Control buttons would not light up until one of them is pressed once.
Push's Duplicate button would not work anymore for clips, tracks and scenes if Clip workflow is selected.
Improvements and feature changes:
Added control surface support for M-Audio Oxygen 4th generation controllers.
Bugfixes:
When choosing “All Individual Tracks” in the Export Audio/Video dialog, tracks using the External Instrument device would not be exported correctly.
Fixed a bug which caused modulations for arrangement clips to disappear when undoing and redoing after duplicating a track.
Improved fonts for Retina displays (Mac OS X only).
Improved graphics for the Track Status Display and the Plug-in browser icon on Retina displays (Mac OS X only).
Fixed a graphics problem which could occur on OS X 10.10 Yosemite when a Max for Live device was instantiated directly at application launch, e.g. by double-clicking an .als file or by having a template set containing a Max for Live device.
Fixed a graphics problem which could occur on OS X 10.10 Yosemite when opening the "Export Audio/Video" dialogue and having the "Zoom Display" preference set to a value higher than 100%.
The Simpler instrument could lose certain macro mappings after converting a Sampler to Simpler and then enabling Simpler's Pitch Envelope.
Fixed the spacing of the "Hz" icon on Simpler's LFO Rate switch on Retina displays
Under certain conditions, the Tension instrument could produce unwanted noise bursts after loading a preset and then playing the first note.
Live could crash when undoing and redoing after importing a clip or a track containing automation from the browser. Live would also keep crashing when recovering the Live Set from the undo file.
Fixed a crash which could occur with the iZotope "Trash 2" VST plug-in on Windows.
Fixed a crash which might occur on Windows while Live scans or loads certain UAD plugins.
9.1.8 Release Notes
Improvements and feature changes:
Added control surface support for Alesis V and VI keyboards.
Live will not auto-update to versions above 9.1.8 when installed on legacy OS versions. Affected operating systems are: Windows XP, Windows Vista, OSX 10.5 and OSX 10.6.
What's New in Version 9.2.2:
• Under certain circumstances Live 64 bit could crash while scanning VST plugins, after changing the input audio device or when opening a VST plugin window, especially when working with large Live Sets or if the program had been running for a very long time.
• Added control surface support for the Akai MIDImix.
• Replaced the icon for Current Project in the browser sidebar.
• Live would crash when dragging a Clip in the Groove Pool.
• Audio Units would stop passing audio after changing the sample rate.
What's New in Version 9.6:
Improvements and feature changes:
Introduced Link, a technology which keeps devices in sync when connected to the same network. A 'Link' section has been added to the Link/MIDI preferences tab.
Link and The Bridge prevent each other from starting once switched on. Moreover, Link and The Bridge both switch off External sync when activated.
Link, The Bridge and External Sync are not available when Live runs as a ReWire slave.
The Python framework has been updated to support Python 2.7.
Added control surface support for the Arturia KeyLab series, Arturia BeatStep and Arturia MiniLab.
Added Control Surface support for the Alesis VX series.
When tweaking Warp mode specific parameters in Simpler (i.e. grain size, flux), these are now updated in real time. Previously, these would be only updated on a per-note basis.
Improved the time required to slice an audio sample to a Drum Rack.
Slicing visualization improvements and other minor cosmetic tweaks for Simpler and Sampler.
While samples are offline or still decoding, Slice to Drum Rack and Slice to new MIDI Track from Simpler are disabled.
Add a preference to re-enable random clip colors.
Updated fonts and added a number of special characters.
The Live 8 Legacy Mode in Operator has been renamed to something more meaningful.
Performance improvements in waveform rendering.
Bug fixes:
Recovering Live sets after a crash would not succeed under certain circumstances.
Live could hang at launch while displaying the splash screen on Windows 10.
Live would crash on OS X 10.11 when a user closed the second window while it was shown in fullscreen mode.
Tracks created by dragging and dropping a Rack or Rack preset will now correctly be assigned with a new track color.
Live might become unresponsive on OS X if no Max application could be found. Furthermore, Live would not find Max 7 on its own on Windows.
Live could hang when loading sets referencing Max devices, if these were saved with Max 6.1.7 or earlier.
Audio files would not retain the color saved in the respective .asd file when dropped into a track.
Replaced one redundant color in the Live color sequence.
Simpler would cause an unusual high memory usage if the user had set 'Complex' as the default mode for Warping.
Live would crash when converting a sliced Simpler to a Drum Rack from within an Instrument Rack.
Live would crash when cropping samples in Sampler.
A crash could take place when playing back sliced samples in Simpler, if 'Snap' had previously been activated in Classic or One-Shot mode.
A crash could occur when dragging the Start Marker to the very end of a file in Simpler and playing back a warped, looped sample with 'Snap' active.
Live could crash when playing back warped samples in Simpler. The crash would occur when a new note began playing at the exact same time that another playing note was ending, if that also choked or retriggered the previous note.
When slicing an audio Clip to a Sampler based slicing preset, all slices would be assigned to the same root note.
Simpler's playhead could jump unexpectedly when starting the transport while playing back warped samples.
Dragging a selection of an arrangement clip into Simpler now sets the start and end flags according to the selection.
Snap is automatically disabled when slicing a Simpler to a Drum Rack. This ensures that the sound of playback does not change after slicing a Simpler to a Drum Rack.
Changing Simpler's playback mode via the keyboard would not be undoable.
When dragging the Simpler start flag towards the end of the sample, this would overlap with the End flag, which then could not be clicked nor dragged anymore. The same behavior occurred the other way around (the End flag might have covered the Start flag).
The text in the Simpler 'Warp As' button would not be displayed properly when running Live in a language other than English.
Fixes a crash which might happen in conjunction with Complex / Pro modes.
Improved the CPU performance of Complex and Pro when playing back short loops. Note that while Clip loops are limited to at least 1/16 note in length, simpler loops can be as small as 50 samples.
Reduced audible artifacts and improved timing for samples warped with Complex and Complex Pro.
The OSR filter might produce unwanted artefacts when used with high frequency and resonance settings.
The modulation destinations for the new legacy filters in Simpler and Operator are now hidden and updated correctly when upgrading a device.
The spread pitch control is now disabled if Simpler is using Re-Pitch as warping mode.
Changes for Push:
It is now possible to toggle the Global Record button via Push by holding Shift and pressing the Session Record button.
'Mute', 'Solo' and 'Stop Clip' can be locked by holding the respective button. This enables muting tracks, bypassing devices, soloing tracks and stopping Clips with one single button press. To select tracks and devices even while locked mute/solo/stop mode is active, it is now necessary to hold the select button.
Improved encoder responsiveness when selecting a parameter through a list on Push 2.
Improved the Push initialization process when the unit is power cycled while Live is open.
Push 2 Firmware updated to v1.0 build 47. This fixes a problem where the hardware would sometimes fail to initialize on Windows. This Firmware update is also intended to mitigate unexpected high velocity values which might be triggered when Push pads are played softly. This is an intermediate step towards a proper fix. Please note that, depending on your pad sensitivity settings, it might now be more difficult to reach maximum velocity.
It is now possible to load and hotswap samples in audio tracks on Push 2. This is achieved by first entering Clip mode.
Sample names are now displayed in the browser while hotswapping.
When Simpler is in 64 pad slicing mode, the touch strip can work as Pitch Bend or Modulation Wheel.
Scales mode can now act as a momentary toggle if held. Furthermore, it is now possible to browse Scales also with the up/down and left/right arrows.
When an empty drum pad is selected, 'Add Device' will work like the 'Browse' button, thus it will not prompt the user to swap the entire Drum Rack anymore but rather will enable to load a device or sample inside the pad.
After converting an audio Clip to a Simpler from Push 2, device mode will be selected automatically.
Added a 12/24 dB button (filter slope) to Auto Filter, Operator and Sampler for Push 2.
When adding a new device to a previously selected pad, the added device will now always be selected.
Live would crash when converting a Clip to Simpler, if the device default for Dropping Samples on Device View consisted of a Simpler instance inside an Instrument Rack.
When loading a sample from the browser, Simpler's "Mode" would be displayed as "Classic" on Push 2, regardless of the default for "Dropping Samples on Device View".
When converting between Simpler and Sampler, Push 2 would lose device selection.
Under certain conditions, the waveform in Simpler flickered on display when zooming in on longer samples.
When zoomed out on a long sample, it is now possible to see an indication of the existing slices on the Push 2 display.
Under certain circumstances the Push pads would not reflect the selected slice when using a sliced Simpler.
Mute and Solo would not work on Push 2 if the currently selected track was outside the Session Ring.
When moving a channel towards the left while in 'Mix' mode, its channel meter would stop working on Push2.
When renaming a macro inside a Rack, the changes would not be immediately reflected on Push 1 and Push 2's display.
Introduced a short delay before showing the tempo/swing message when touching the encoders, to reduce the amount of notifications.
Push would keep showing the loop selector in sequencer mode after deleting a Clip.
The display could get stuck in User mode on Push 2. Additionally, it is now possible to momentarily enter User mode by holding the respective button.
The color mapping for Push 2's step sequencers has been improved, to better reflect different velocity ranges.
The Arrow Keys would stop working after switching between note and session mode while using the Push 2 browser.
Selecting a scene in Live would cause Clip selection from Push not to work anymore.
When hotswapping an instrument, browser selection could disappear when scrolling up/down with the Push 2 arrows.
No auto preview was available for the currently selected item when navigating to a list using an encoder.
Under certain circumstances pressing 'Add Track' and loading a new device would swap the instrument residing in the currently selected track instead.
After using 'Collect All and Save', Simpler instances would fail to display a waveform due to the changed file path.
Improved waveform rendering when switching through tracks and selecting Drum Pads.
When holding the mute/solo button, muted/soloed tracks would display their original color on the display: these now correctly display the muted/soloed state.
Previously, Push 2 would only show the left channel for stereo waveforms. As of now, the sum of both channels is shown.
Fixed a few visual inconsistencies for Push 2, where the On/Off icons might be missing for some devices and the Sawtooth waveform orientation was be inverted with respect to the one shown in Live's device choosers.
When trying to change the Start/End parameter on an empty Simpler, the parameter would stop updating its state on the Push 1 display even after adding a sample.
On Push 1, plugin parameter names would not update correctly anymore if these change dynamically e.g. when loading a new preset. In addition, Push 2 now also updates such plugin parameter names dynamically.
Push 1 can now utilize custom device banks for Simpler.
Dynamic parameter banks are in place for Push 1 as well. Parameters that don't have an effect due to some other parameter being disabled will now be hidden. In addition, Simpler, Sampler, Operator and Auto Filter now have the 'Filter Slope' parameter in their banks.
Added control for further Simpler parameters on Push 1: Warp mode, Warp On/Off, Voices, Gain.
The encoder resolution for Push 1 was significantly different as of Live 9.5 when compared to previous versions. This has now been rectified.
Fractions were not shown correctly for Simpler on the Push1 display.
Quantized parameters were not displayed correctly on Push1's bar graph.
Ableton has updated Live 9 to v9.7 which brings more sample slicing options, a new drum layout and on-screen display improvements to Push, Ableton's hardware instrument. Plus you can route audio or MIDI right from the unit, so you can stay in your flow while you switch ins and outs for sampling and resampling. And if you don't use Push, the new slicing capabilities are now features of all editions of Live 9 – from Lite to Suite.
Improvements and feature changes:
New Simpler Slicing modes (Beat, Region, Manual) are now available. As a consequence of the new Simpler features, Live Sets created with this version cannot be opened with previous versions anymore. The beat time of connected apps in a Link session will be aligned when starting Live's playback with Tap Tempo or via Looper. Updated manual, lessons and info text translations.
9.7.2 Release Notes Improvements and feature changes: - Added support for the Arturia MiniLab MkII control surface. In order for the script to function correctly, it is recommended to update the Minilab MkII Firmware to the latest version available.
Bugfixes: - If a dropdown or context menu was open in Live, pressing CMD+Shift+- on a Mac OS would cause Live to crash. - The GUI would appear laggy when zooming in audio tracks and moving the zooming hotspot on Windows if the files were being streamed from a hard drive. - Fixed a bug that caused Live to crash when opening a context menu in a device chain containing no instruments. - Fixed a bug which prevented changing the text color in Drum Rack return chains to white when the chain's color was dark. - Fixed a graphical glitch that occurred when hovering over automation segments drawn on top of a waveform. The glitch was visible in Detail View (in both the Arrangement and Session View), and would only appear in automation segments not covering the full track height. - Disabled audio and MIDI meters were not correctly shown as grayed out in the routing choosers - When Live's authorization was not successful, the dialog box could erroneously confirm it as successful. - Fixed a bug which prevented auto updates from working on Windows 10.
Changes for Push: - Fixed a bug that caused Live to crash when moving tracks while Push 2 was connected, under certain circumstances. - When selecting a track containing a Simpler which was playing back a sample, the playhead would sometimes not be displayed. - Live would crash if a Drum Rack clip in the last scene was duplicated from Push. - Live would crash when importing a greater number of MIDI files to the Arrangement than the amount of available MIDI tracks, if Push 2 was connected. - When routing via Push 2, the display process might allocate an unusual amount of memory.